A Common Sense Baby Crib Safety List

A common Sense Baby Crib Safety Checklist.

Congratulations! You’ve got a child on the way! When your baby has gotten here, among the most important parts of your brand-new life together will be getting a great night’s sleep– you in your bed, the infant in a safe and comfy crib. Initially, you may want your newborn to oversleep a bassinet by your bed, making it a little simpler for breastfeeding moms, however have a baby crib prepared by the time your infant can roll over. Your baby will spend more time in the crib than anywhere else, so safety is of utmost significance.

What Makes a Baby Crib Safe?

* The bars or slats of the baby crib railing need to be no more than 2-3/8″ apart, close enough together to avoid your infant’s head from slipping through or getting stuck. That baby crib in the attic might be a lovely antique, however it probably does not meet this security standard. Previously owned older cribs might also lead or have splinters paint in addition to slats that are too far apart.

* Cribs with cutout styles along the rail might look quite, but your child’s arm or neck might get stuck in them. * The baby crib must be durable. Your child will oversleep a crib up until it’s time to move into a regular bed in between the ages of 2 and 3. When shopping for the crib, give it a good shake to see if it rattles or wobbles. * Construction products should be stained or painted hardwoods like maple, ash, beech or oak. Some metal cribs are also really strong and secure.

Safety Tips For Cribs

* For security, the dropsides should be at least 9″ above the bed mattress support when lowered. When the side is raised, the top must be at least 26″ above the support at its lowest position. You must have no difficulty silently decreasing the side and raising rail easily with one hand, because chances are you’ll have a sleeping baby in your arms.

* Make things a little much easier on your back by selecting a crib with an adjustable height bed mattress. A newborn can rest greater in the baby crib, while an infant who can sit up needs a lower mattress so he can’t climb out. You can alter the height of a lot of bed mattress by merely raising or decreasing the mattress support.

* Check the hardware on the crib for sharp edges or points or anything else that could injure your infant. * The bed mattress should fit snugly into the crib. If you can fit 2 fingers between the side of the bed mattress and the crib, it is too small. Keep an eye on foam mattresses; with time, they might break down at the edges and leave gaps. Examine the bed mattress assistance to ensure there are safety clips that lock the hangers into their notches.

* Use nonflammable and hypoallergenic bumper padding connected to the within railings of the baby crib to cushion all 4 sides and prevent your child from sticking an arm or leg through the railings. Safely attach the bumper pads to the sides of the baby crib in a minimum of 6 places. Make certain to remove bumper pads when your infant becomes more active.

* Follow assembly instructions thoroughly. Regularly tighten all screws, nuts, and bolts and inspect teething rails for fractures. Inspect the mattress support hooks routinely.

* Don’t place a baby crib versus a window, near drapes or drape cords, or near furnishings that could assist your infant climb out.

* Crib toys need to be eliminated from the crib when your child is sleeping.   And get rid of mobiles when baby is able to grab at objects.

Know The Safety Rules

Federal security standards went into result in 1973, however just because 1991 do most cribs meet all obligatory safety requirements (16CFR part 1508) as set by The Consumer Products Safety Commission (CPSC) and the voluntary requirements (ASTM F966 and F1169) as set by the American Society for Testing and Materials (ASTM). The Juvenile Products Manufacturers’ Association (JPMA) licenses baby cribs that satisfy the security standards.  For more details and product recalls on baby crib security and other nursery devices, contact the Consumer Products Safety Commission at 1-800-638-2772.

* The bars or slats of the crib railing need to be no more than 2-3/8″ apart, close enough together to prevent your child’s head from slipping through or getting stuck. That crib in the attic might be a gorgeous antique, however it most likely does not satisfy this security requirement.

* Use nonflammable and hypoallergenic bumper cushioning attached to the inside railings of the crib to cushion all four sides and avoid your child from sticking an arm or leg through the railings.

Check Out These Safe Convertible Cribs

Prices pulled from the Amazon Product Advertising API on: